|
| |
 |
| Electric
Modeling Items
Foam Airplanes,
Motors, Controllers
Batteries, Propellers and More
|
|
Check them Out!! |
2
Fantastic Airplanes
Our 3D
foamies were designed for state of the art performance.The 540
Edge and the Sukhoi SU-31 both have a new designed and much
more rugged motor mount assembly that is easier to install.
All of the slots are laser cut for the control horns. Much detai
lwork has been done to make building faster and more accurate
for you.
Be sure to see the videos of our electrics in action
on the description pages.
|
|
 |
 |
| Our
540 Edge been fine tuned by experts to
improve the flying characteristics and is a replacement
for our earlier offerings. It has one of the best color
schemes around. We offer nothing but the best in quality
laser cutting and silk screened color schemes. |
Our Sukhoi
SU-31 Our unique SU-31 has superior flying characteristics
that are an improvement over the older style foamies.
The Bright Yellow base with Red trim makes it easy to
see in any sky. It has the new design of firewall and
makes it much more durable. It is also much easier to
install |
In
our focus on quality and performance we offer
the 540 Edge and the SU-31
above.
|
| |
| |
|
Outrunner
motors - Hacker
Hacker
A20 Series Outrunner
A20-22L and A20-30M
The
new Hacker A20 Series motors are the latest design using
outrunner technology. Specifically engineered for high
power and high efficiency using the proprietary components
of the finest quality. |
|
Hacker
Outrunner motors come with many of the accessories that
you have to pay extra for with other brands. With the
motor, you also get 2 prop adapters, plywood and aluminum
motor mounts, screws and 2 spare shafts.
|
Click
on the images for more detail |
| |
|
Motor
Controllers Phoenix and Hacker
|
|
The
top picture is a Phoenix 25 controller.
The Phoenix controllers look basically the same. They
are just larger physically when they have larger amperage
capabilities.
|
| |
The
PHX-Link contains a proprietary Phoenix
interface adapter and standard USB cable. All you need
is a USB port on your PC.
|
| |
All
new Hacker X Series controllers. Specially
developed for high pole outrunner and 2 pole inside runner
brushless motors. Features include automatic timing, auto
NiMH detection, selectable LiPo cutoff, selectable acceleration,
motor direction adjustment, Bec, low voltage cut-off,
brake on or off, soft start, adjustable timing, and adjustable
frequency. |
Click
on the images for more detail
NEED
A TACHOMETER? We have those too!
CLICK HERE TNC
|
| |
|
Small
for Electrics Servos
Fast Micro servos At
least 15" inch/ounce and .15 speed
|
Hitec
56
|
Hitec
55
|
Click
on the images for more detail |
| |
|
Receiver...
GWS NARO-6 channel/Horizontal Receiver
6 Channel micro receiver
|
|
|
This
is a micro PPM 6 channel receiver. It has proven to
be very reliable. It comes in two different shifts.
One shift is for JR/Airtronics and another for Futaba/Hitec.
|
Click
on the image for more detail |
DN
Power Micro-Controlled LiPo/Li-Ion
Parallel Charger w/ LCD Display
DN charger/$85.00 |
This
charger is different than most. It will charge 2, 3, and 4
cell LiPo's. The adjustable charge rate ranges from .2 to
2 amps. It is actually 4 chargers in one case. Each cell is
charged independently. It is safe, as it reads and charges
each cell to 4.2 volts then cuts off. Everytime you charge
your batteries, the charger balances each cell to 4.2 volts.
One of the things that can happen charging your cells in series,
(most common chargers) is that you can have one or two weaker
cells and if there is a good one it can be overcharged. Not
a good thing to happen.
This charger comes with the adaptors to charge all of the
EP cells. We also have adaptors to charge Thunder Power batteries
through the balancing port. We can also take care of Poly
Quest packs as well. Adaptors are available for almost all
of the batteries with balancing ports. There is also a port
that has terminals for making your own adaptors.
Operation is simple. Plug the batteries into the charger and
push the start button. The display tells you what the voltage
of each cell is at start up and the amperage for charging
each cell is clear on the display.
This charger was tested by Red Schofield and he gave it high
marks for its' quality and simplicity.
|
|
Thunder
Power Batteries
Thunder
Power Lithium Polymer Batteries
READ
THIS WARNING BEFORE PURCHASING ANY LIPO BATTERIES! PDF FORMAT
Click on the above text
|
|
|
Thunder
Power 1350mah V2
3 cell 11.1 volt LiPo Battery.
These are the new Pro-Lite series with
the balancer adaptor
Type: LiPo
Capacity: 2100mAh
Voltage: 11.1V 3 cell
Connector Type: JST
Click on battery image
for more and for our charger options
|
| |
Thunder Power Pro Lite V2
 |
Pro Lite V2 Lipo
Type: LiPo
Capacity: 730mAh
Voltage: 7.4V
Connector Type: JST
Weight: 1.38 oz (39g)
|
Click
on the images for more detail |
| |
|
Electric
Slow Flyer Propellers
APC or GWS Hyper Drive..
|
|
Slow
flyer Propellers in these sizes:
8 x 3.8 Slow Flyer
9 x 3.8 Slow Flyer
9 x 4.7 Slow Flyer
10 x 3.8 Slow Flyer
10 x 4.7 Slow Flyer
11 x 3.8 Slow Flyer
11 x 4.7 Slow Flyer
9 x 5
GWS Hyper Drive
(Pictured)
11 x 7 Gws Hyper Drive (Pictured)
|
|
| |
Click
on the images for more detail |
| |
|
Accessory
Items for your Electric
These
are high tech Phoenix 10 and Phoenix 25 Controllers.
Blenderm
Tape
Are you tired of the tape coming loose on your electric
flying surfaces? This is the only tape that really works
on all of the foam airplanes for hinging. It is thin,
flexible and has a very aggressive adhesive. It stays
where you put it. Use it on all electric airplanes that
use the tape to hinge the flying surfaces with tape.
Have a roll in your tool box and you can use it as intended
to patch up cut fingers!
BSI Insta-Set CA Activator Foam Safe
2 oz
CPR-72
|
Carbon
Fiber Tubes
and Rods
Recommended:
060 x 36" Carbon rod
125 x 36" Carbon tube
157 x 36" Carbon tube
188 x 36" Carbon tube
118 x .019 x 36" Carbon flats
CA
Activator, Foam Safe
Ca
Activator Foam Safe
CPR-75
These
are 10 ounce cans of a great kicker. You will use
it to the bottom of the can, and that will take you
a long time. The nozzle does not plug and will spray
evenly for the entire can, not turn into a stream.
It will not evaporate while is sitting on your workbench
|
|
|
Commercial
Velcro
2"x12" ELE-76
Both hook and loop included $2.50
|
|
|
|
|
|
Click
on the images for more detail
|
| Item |
Type |
Description |
Price |
| ELE-00 |
DN
Charger |
Micro-Controlled
LiPo/Li-Ion
Parallel Charger w/ LCD Display |
$85.00 |
| ELE-06 |
Phoenix
|
Phoenix
10 controller |
$55.00 |
| ELE-08 |
Phoenix
|
Phoenix
25 controller |
$70.00 |
| ELE-02 |
Hacker |
Hacker
A20-22L
Outrunner motor |
$60.00 |
| ELE-05 |
Hacker
& ESC Motor Combo |
Hacker
A20-22L
Outrunner motor
Hacker X-20 controller, ESC |
$95.00
|
| ELE-07 |
Hacker |
Hacker
X-20 controller |
$50.00 |
| ELE-10 |
Phoenix
|
Phoenix
Link to program Phx controllers |
$25.00 |
ELE-13 |
TP Pro Lite |
Thunder
Power 730 mah 7.4 volt LiPo |
$19.00 |
| ELE-14 |
TP
|
Thunder
Power 2100 mah 11.1 volt 3 Cell LiPo |
$70.00 |
| ELE-16 |
TP
|
Thunder
Power 1320 mah 11.1 volt 3 Cell LiPo
/ balancer |
$55.00 |
| ELE-20 |
GWS
|
GWS
NARO Horizontal 6 Channel Rx Futaba/Hitec |
$30.00 |
| Channel
|
# |
Specify
the Channel for Rx above |
|
| ELE-21 |
GWS
|
GWS
NARO Horizontal 6 Channel Rx JR/Airtronics |
$30.00 |
| Channel
|
# |
Specify
the Channel for Rx above |
|
| ELE-22 |
GWS
|
GWS
Crystals
for GWS NARO Receiver |
$7.50 |
| ELE-26 |
GWS
|
NARO+F/HP/BB
Sub Micro Servo |
$19.00 |
| ELE-28 |
Hitec
|
HS
55 Sub Micro Servo |
$19.00 |
| ELE-30 |
Hitec
|
HS
56 Sub Micro Servo |
$26.00 |
| ELE-34 |
GWS
|
9
x 5 Hyper Drive prop |
$
2.50 |
| ELE-36 |
GWS
|
11
x 7 Hyper Drive prop |
$3.00 |
| ELE-40 |
APC
|
APC
8 x 3.8 Slow Flyer |
$
2.75 |
| ELE-42 |
APC
|
APC
9 x 3.8 Slow Flyer |
$
2.75 |
| ELE-44 |
APC
|
APC
9 x 4.7 Slow Flyer |
$
2.75 |
| ELE-46 |
APC
|
APC
10 x 3.8 Slow Flyer |
$
3.00 |
| ELE-48 |
APC
|
APC
10 x 4.7 Slow Flyer |
$
3.00 |
| ELE-50 |
APC
|
APC
11 x 3.8 Slow Flyer |
$
3.25 |
| ELE-52 |
APC
|
APC
11 x 4.7 Slow Flyer |
$
3.25 |
| ELE-60 |
3M
|
Blenderm
tape 1" Wide |
$
2.50 |
| ELE-62 |
DCRC
|
.060
x 36" Carbon Solid Rod |
$
3.00 |
| ELE-64 |
DCRC
|
.125
x 36" Carbon Tube |
$
3.50 |
| ELE-66 |
DCRC
|
.157
x 36" Carbon Tube |
$
4.00 |
| ELE-68 |
DCRC
|
.188
x 36" Carbon Tube |
$
4.50 |
| ELE-70 |
DCRC
|
.118
x .019 x 36" Carbon Flats |
$
4.00 |
| ELE-72 |
SUPER-GOLD+™ |
BSI
Foamsafe
CA 1/2 Ounce
Thin |
$
6.75 |
| ELE-74 |
SUPER-GOLD™ |
BSI
Foamsafe
CA 1/2 Ounce Medium |
$
6.75 |
| CPR-70 |
IC-2000™ |
BSI
IC-2000™
CA 1/2 Ounce Medium |
$7.50 |
CPR-72 |
BSI Insta-Set™ |
BSI Insta-Set Foam Safe ™ CA Activator
2 oz |
$4.00 |
| CPR-75 |
Activator
10 Oz |
Ca
Activator, Foam Safe! Spray Can |
$12.00 |
| ELE-76 |
Velcro |
Velcro
Mounting 2"x12" |
$
2.50 |
| ELE-78 |
Kit |
Ultra
Light Landing Gear |
$
15.00 |
| QM40-10 |
Prather |
Prop
pitch gauge |
$
70.00 |
|
|
|
|
