Hacker Outrunner Motors

Hacker Outrunner motors come with many of the accessories that you have to pay extra for with other brands. With the motor, you also get 2 prop adapters, plywood and aluminum motor mounts, screws and 2 spare shafts.

Hacker A20-22L

A20-22L Developed for 12-18 oz. Parkflyer models with 3 cell LiPoly batteries. The 12 pole “Outrunner” type design creates MASSIVE TORQUE, therefore larger direct drive props can be used without the need for a gearbox. This motor features Oversize bearings, Curved Neo-magnets, and High efficiency stator design. These motors produce the most power at lower current consumption than other popular Outrunner designs!. Included are 2 prop adapters, plywood and aluminum motor mounts, screws and 2 spare shafts. The motor uses a standard 3mm output shaft.

I recommend a Thunder Power 1320 3-cell 11.1 volt and a Hacker X-20 for this motor on a high performance 3D aerobatic airplane, like the YAK-55.

RPM 924, Weight 57g (2.01oz) Battery 3 LiPo / 1200-2100mah Prop 10x4.7
Current 6-14 AMPS
Price $60.00

Hacker A20-30M

A20-30M- Developed for 7-12 oz. Slowflyers and Aerobatic Parkflyers models with 3 cell LiPoly batteries. The 12 pole “Outrunner” type design creates MASSIVE TORQUE, therefore larger direct drive props can be used without the need for a gearbox. This motor features Oversize bearings, Curved Neo-magnets, and High efficiency stator design. These motors produce the most power at lower current consumption than other popular Outrunner designs!. Included are 2 prop adapters, plywood and aluminum motor mounts, screws and 2 spare shafts. The motor uses a standard 3mm output shaft.

I recommend a Thunder Power 1320 3-cell, 11.1 volt LiPo and a Hacker X-12 for a safe combination. With this, you will be well within the recommendations of the manufacturers
RPM 980, Weight 42g (1.48oz), Battery 3 LiPo / 800-1300mah, Prop 9x4.7
Current 4-11 AMPS
Price: $65.00